Moebius Skipjack Model Submarine R/C Instructions
Posted by Mike Caswell on 10 November 2012 08:38 AM

Part #1 of the manual comprises-


The Fittings Kit   
Marking Off, Test Fitting, and Punching holes   
Assembling the Aft Dive Planes & Rudder   
Cutting the Hull for the Z Type Configuration   
Drilling and opening Upper Hull Holes   
Preparing And Assembling The Sail   
Installing the Sub-driver Foundations   
Welding the Lower Hull Together  
Assembling the Upper Hull   
Installing The Sail   
Installing the Torpedo System  

 skipjack instruction manual part #1.pdf (1.59 MB)

Comments (0)