Knowledgebase: Sales > Electroless Plating
Cost Of Electroless Nickel
Posted by Lance Caswell on 31 October 2006 05:34 PM

If you buy our Jumbo Electroless Nickel, or Electroless Krome kits, the cost of the plating works out to approx $0.50 per square inch, when plated at 1/1000"

After the initial purchase of the kit, buying replenishment chemicals by the gallon, the cost is reduced to $0.21 per square inch, when plated at 1/1000".

The Jumbo electroless kit will plate approx 600 sq in at 1/1000" before you need to buy more chemicals.


Comments (0)