RSS Feed
Knowledgebase : Sales > Electroless Plating
If you buy our Jumbo Electroless Nickel, or Electroless Krome kits, the cost of the plating works out to approx $0.50 per square inch, when plated at 1/1000"After the initial purchase of the kit, buying replenishment chemicals by the gallon, the cost...
Q: What is the phosphorous level in your Electroless Nickel and Krome Kits?A: It's a mid phosphorous formula, 5-9%.
Firstly, you don't have to spend money on a power source and you don't have to make any electrical calculations or connections. You don't have to worry about anode placement, because the solution will plate anywhere that it contacts, even inside tubes. Yo...
The solution needs be heated to 190°F, so it can be more inconvenient to use. The nickel is depleted from the solution, not anodes, so it will need to be replenished constantly and is more expensive to operate than regular plating. Also, you need to keep...
Electroless plating requires no power source. The metal is deposited on the part using a complex chemical reaction, rather than being forced onto the part by a power source. Electroless plating usually requires that the solution be heated to high temperat...