CASWELL INC
Safety Data Sheet
Anodize & Chrome Stripper
SECTION 1: Identification
1.1 Product identifier
Product name Anodize & Chrome Stripper
Product number ANSTP
Brand Caswell
1.3 Recommended use of the chemical and restrictions on use
Metal Finishing Product
1.4 Supplier's details
Name Caswell Inc
Address 7696 Route 31
Lyons NY 14489
USA
Telephone 315 946 1213
Fax 315 946 4456
email sales@caswellplating.com
1.5 Emergency phone number(s)
Office Hours (9-4ET): 315 946 1213
24 Hour: CHEMTEL US# 1-800-255-3924 Intl# +01-813-248-0585
SECTION 2: Hazard identification
2.1 Classification of the substance or mixture
- Acute toxicity, oral (chapter 3.1), Cat. 4
- Eye damage/irritation (chapter 3.3), Cat. 1
- Skin corrosion/irritation (chapter 3.2), Cat. 1A
- Corrosive to metals (chapter 2.16), Cat. 1
2.2 GHS label elements, including precautionary statements
Pictogram
Version: 1.1, Date of issue: 2026-01-23, p. 1 of 7
Safety Data Sheet
Anodize & Chrome Stripper
Signal word Danger
Hazard statement(s)
H302 Harmful if swallowed
H318 Causes serious eye damage
H314 Causes severe skin burns and eye damage
H290 May be corrosive to metals
Precautionary statement(s)
P264 Wash … thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/.../if you feel unwell,
P330 Rinse mouth.
P501 Dispose of contents/container to …
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses if present and easy to do. Continue rinsing.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P310 Immediately call a POISON CENTER/doctor/...
P321 Specific treatment (see … on this label).
P405 Store locked up.
P234 Keep only in original container.
P390 Absorb spillage to prevent material damage.
P406 Store in a corrosive resistant/… container with a resistant inner liner.
SECTION 3: Composition/information on ingredients
3.1 Substances
Hazardous components
1. Sodium hydroxide solid or pellets
Concentration < 80 %
EC no. 215-185-5
CAS no. 1310-73-2
Index no. 011-002-00-6
2. Proprietary Additives
Concentration 20 %
Trade secret statement (OSHA 1910.1200(i))
Specific Non Hazardous and Non Reportable Chemical Compounds Have Been Omitted As a Trade Secret under
OSHA 1910.1200(i)
Version: 1.1, Date of issue: 2026-01-23, p. 2 of 7
Safety Data Sheet
Anodize & Chrome Stripper
SECTION 4: First-aid measures
4.1 Description of necessary first-aid measures
General advice POISON. May be fatal if swallowed. Causes severe respiratory tract, eye and
skin burns.
If inhaled Do NOT induce vomiting. Never give anything by mouth to an unconscious
person. Rinse mouth with water. Consult a physician.
In case of skin contact Wash off with soap and plenty of water. Consult a physician.
In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a
physician.
If swallowed Drink 1 or 2 glasses of water. Do NOT induce vomiting. Get medical
attention immediately if symptoms occur.
Personal protective equipment for first-aid responders
See section 8
4.2 Most important symptoms/effects, acute and delayed
not available
SECTION 5: Fire-fighting measures
5.1 Suitable extinguishing media
As required for surrounding fire
5.2 Specific hazards arising from the chemical
Flammable hydrogen gas may be produced on prolonged contact with metals such as aluminum, tin, lead and zinc
5.3 Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
See section 8 for PPE
6.2 Environmental precautions
not available
6.3 Methods and materials for containment and cleaning up
Sweep up powder and store away in plastic, away from incompatible materials for disposal. If in liquid form, dyke
spill and absorb with kitty litter or other absorbent, then sweep up and store in plastic for future disposal.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Consult SDS before use. Wear PPE.
7.2 Conditions for safe storage, including any incompatibilities
Version: 1.1, Date of issue: 2026-01-23, p. 3 of 7
Safety Data Sheet
Anodize & Chrome Stripper
Store in plastic, at room temperature, away from incompatible materials.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
1. Sodium hydroxide solid or pellets (CAS: 1310-73-2 EC: 215-185-5)
STEL: Ceiling 2
8.2 Appropriate engineering controls
Follow general procedures for handling corrosive materials. Strong Base. Keep away from acids.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Pictograms
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH
(US) or EN 166(EU).
Skin protection
Wear chemical resistant gloves and clothing.
Body protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the
specific work-place., The type of protective equipment must be selected according to the concentration and amount
of the dangerous substance at the specific workplace.
Respiratory protection
NIOSH/MSHA approved air purifying respirator with an organic vapor cartidge or canister may be permissable
under certain circumstances where airborne concentrations are expected to exceed exposure limits.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance/form (physical state, color, etc.) Hydroscopic White Powder
Odor Mild
Odor threshold Not Available
pH 13
Melting point/freezing point 605°F
Initial boiling point and boiling range 2534°F
Flash point Not Flammable
Evaporation rate Not Available
Flammability (solid, gas) Not Flammable
Upper/lower flammability limits Not Available
Upper/lower explosive limits Not Available
Vapor pressure Not Available
Vapor density Not Available
Relative density 2.130
Solubility(ies) Complete In Water
Version: 1.1, Date of issue: 2026-01-23, p. 4 of 7
Safety Data Sheet
Anodize & Chrome Stripper
Partition coefficient: n-octanol/water Not Available
Auto-ignition temperature Not Available
Decomposition temperature Not Available
Viscosity Not Available
Explosive properties Not Available
Oxidizing properties Not Available
Other safety information
Product does not contain Volatile Organic Compounds
SECTION 10: Stability and reactivity
10.1 Reactivity
Contact with moisture may generate enough heat to ignite surrounding combustible materials.
10.2 Chemical stability
Stable
10.3 Possibility of hazardous reactions
Not Available
10.4 Conditions to avoid
Contact with incompatible materials.
10.5 Incompatible materials
Water, acids, chlorinated hydrocarbons, metals and organic materials.
SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
EYES: 50 mg/24H
DERMAL LD50: 500 mg/kg (rabbit)
Skin corrosion/irritation
Highly Corrosive To Skin
Serious eye damage/irritation
Highly Corrosive To Eyes
Respiratory or skin sensitization
Not Available
Germ cell mutagenicity
Not Available
Carcinogenicity
Not Available
Reproductive toxicity
Not Available
STOT-single exposure
Version: 1.1, Date of issue: 2026-01-23, p. 5 of 7
Safety Data Sheet
Anodize & Chrome Stripper
Not Available
STOT-repeated exposure
Not Available
Aspiration hazard
Not Available
SECTION 12: Ecological information
Toxicity
Not Available
Persistence and degradability
Not Available
Bioaccumulative potential
Not Available
Mobility in soil
Not Available
Results of PBT and vPvB assessment
Not Available
SECTION 13: Disposal considerations
Disposal of the product
Consult appropriate federal and local regulations for disposal. Empty containers are subject to the same regulations.
Disposal of contaminated packaging
Consult appropriate federal and local regulations for disposal. Empty containers are subject to the same regulations.
Waste treatment
Not Available
Sewage disposal
Not Available
SECTION 14: Transport information
DOT (US)
UN Number: UN1823
Class: 8
Packing Group: II
Proper Shipping Name: Sodium Hydroxide, Solid
Reportable quantity (RQ):
Marine pollutant:
Poison inhalation hazard:
IMDG
UN Number: UN1823
Class: 8
Packing Group: II
Version: 1.1, Date of issue: 2026-01-23, p. 6 of 7
Safety Data Sheet
Anodize & Chrome Stripper
EMS Number:
Proper Shipping Name: Sodium Hydroxide, Solid
IATA
UN Number: UN1823
Class: 8
Packing Group: II
Proper Shipping Name: Sodium Hydroxide, Solid
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
Massachusetts Right To Know Components
Chemical name: Sodium hydroxide
CAS number: 1310-73-2
New Jersey Right To Know Components
Common name: SODIUM HYDROXIDE
CAS number: 1310-73-2
Pennsylvania Right To Know Components
Chemical name: Sodium hydroxide
CAS number: 1310-73-2
HMIS Rating
Anodize & Chrome Stripper
HEALTH *3
FLAMMABILITY 0
PHYSICAL HAZARD 2
PERSONAL PROTECTION F
NFPA Rating
SECTION 16: Other information
16.1 Further information/disclaimer
DISCLAIMER: The information above is believed to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with
respect to such information, and we assume no liability resulting from its use. Users should make their own
investigation to determine the suitability of information for their particular purposes. In no event shall Caswell Inc be
liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental,
consequential or exemplary damages, whatsoever arising, even if Caswell Inc has been advised of the possibility of
such damages.
Version: 1.1, Date of issue: 2026-01-23, p. 7 of 7