CASWELL INC
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
SECTION 1: Identification
1.1 Product identifier
Product name Electroless Cobalt Plating Solution Part A
Product number COA
Brand Caswell
1.4 Supplier's details
Name Caswell Inc
Address 7696 Route 31
Lyons, NY 14489
USA
Telephone 315 946 1213
Fax 315 946 4456
email sales@caswellplating.com
1.5 Emergency phone number(s)
Office Hours (9-4ET): 315 946 1213
24 Hour: CHEMTEL US# 1-800-255-3924 Intl# +01-813-248-0585
SECTION 2: Hazard identification
2.1 Classification of the substance or mixture
- Carcinogenicity (chapter 3.6), Cat. 2
- Acute toxicity, oral (chapter 3.1), Cat. 4
- Sensitization, respiratory (chapter 3.4), Cat. 1
- Sensitization, skin (chapter 3.4), Cat. 1
2.2 GHS label elements, including precautionary statements
Pictogram
Signal word Warning
Hazard statement(s)
H351 Suspected of causing cancer
H302 Harmful if swallowed
Version: 1.0, Date of issue: 2015-12-09, p. 1 of 7
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
H317 May cause an allergic skin reaction
Precautionary statement(s)
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P405 Store locked up.
P501 Dispose of contents/container to …
P264 Wash … thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/.../if you feel unwell,
P330 Rinse mouth.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P284 [In case of inadequate ventilation] wear respiratory protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for
breathing.
P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/...
P272 Contaminated work clothing should not be allowed out of the workplace.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P313 If skin irritation or a rash occurs: Get medical advice/attention.
P321 Specific treatment (see … on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P273 Avoid release to the environment.
P391 Collect spillage.
SECTION 3: Composition/information on ingredients
3.1 Substances
Hazardous components
1. NICKEL (II) SULFATE
Concentration 45 %
EC no. 232-104-9
CAS no. 7786-81-4
Index no. 028-009-00-5
2. COBALT SULFATE HEPTAHYDRATE
Concentration 10 %
CAS no. 10026-24-1
3. WATER OR OTHER NON-REPORTABLE INGREDIENTS
Concentration 45 %
CAS no. 7732-18-5
SECTION 4: First-aid measures
4.1 Description of necessary first-aid measures
General advice Consult a physician. Show this safety data sheet to the doctor in attendance.
Version: 1.0, Date of issue: 2015-12-09, p. 2 of 7
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
If inhaled If breathed in, move person into fresh air. If not breathing, give artificial
respiration.
In case of skin contact Rinse with plenty of water. Get medical attention if irritation develops and
persists.
In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a
physician.
If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious
person. Rinse mouth with water. Consult a physician.
Personal protective equipment for first-aid responders
Refer to section 8
4.2 Most important symptoms/effects, acute and delayed
Compounds containing nickel can cause dermatitus and skin rash.
SECTION 5: Fire-fighting measures
5.1 Suitable extinguishing media
Use extinguishing media appropriate for surrounding fire.
5.2 Specific hazards arising from the chemical
Thermal decomposition will form oxides of nickel and sulfur.
5.3 Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.2 Environmental precautions
Nickel compounds are damaging to aquatic life
6.3 Methods and materials for containment and cleaning up
SMALL SPILLS: Contain and absorb with absorbent material and place into containers for later disposal. Wash
site of spillage thoroughly with water. LARGE SPILLS: Dike far ahead of spill to prevent further movement.
Recover by pumping or by using a suitable absorbent material and place into containers for later disposal. Dispose
in suitable waste container.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Must be stored above 55 deg F.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed and away from incompatible materials.
SECTION 8: Exposure controls/personal protection
Version: 1.0, Date of issue: 2015-12-09, p. 3 of 7
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
8.1 Control parameters
1. NICKEL (II) SULFATE (CAS: 7786-81-4 EC: 232-104-9)
PEL-TWA: 1 mg/m3 (OSHA)
8.2 Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end
of workday.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Pictograms
Eye/face protection
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Wear chemical resistant gloves and clothing.
Body protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to
the specific work-place., The type of protective equipment must be selected according to the concentration and
amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100
(US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole
means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved
under appropriate government standards such as NIOSH (US) or CEN (EU).
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance/form Reddish Liquid
Odor
Odor threshold
pH 3.5
Melting point/freezing point 55 deg F
Initial boiling point and boiling range 212 de g F
Flash point
Evaporation rate
Flammability (solid, gas) Not Flammable
Upper/lower flammability limits
Vapor pressure
Vapor density
Relative density 1.34
Solubility(ies) 100% In Water
Partition coefficient: n-octanol/water
Auto-ignition temperature
Version: 1.0, Date of issue: 2015-12-09, p. 4 of 7
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
Decomposition temperature
Viscosity
Explosive properties
Oxidizing properties
SECTION 10: Stability and reactivity
10.1 Reactivity
Not reactive
10.2 Chemical stability
Stable
10.4 Conditions to avoid
Excess Heat
10.5 Incompatible materials
Cyanides, Strong Alkalis
SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
Oral LD50: 264 mg/kg
Skin corrosion/irritation
Continued Exposure to nickel can cause nickel itch/dermatitus/skin rash.
Serious eye damage/irritation
May cause eye irritation
Respiratory or skin sensitization
May cause respiratory and skin sensitisation.
Germ cell mutagenicity
Not known
Carcinogenicity
Nickel compounds are a known carcinogen.
Reproductive toxicity
Not known
STOT-single exposure
Not known
STOT-repeated exposure
Not known
Aspiration hazard
Not known
SECTION 12: Ecological information
Version: 1.0, Date of issue: 2015-12-09, p. 5 of 7
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
Toxicity
Not known
Persistence and degradability
Not known
Bioaccumulative potential
Not known
Mobility in soil
Not known
Results of PBT and vPvB assessment
Not known
Other adverse effects
Nickel compounds are damaging to the aquatic environment.
SECTION 13: Disposal considerations
Disposal of the product
Consult appropriate federal and local regulations for disposal. Empty containers are subject to the same
regulations.
Disposal of contaminated packaging
Consult appropriate federal and local regulations for disposal. Empty containers are subject to the same
regulations.
SECTION 14: Transport information
DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
Massachusetts Right To Know Components
Chemical name: Nickel sulfate
CAS number: 7786-81-4
New Jersey Right To Know Components
Common name: NICKEL SULFATE
CAS number: 7786-81-4
Pennsylvania Right To Know Components
Chemical name: Sulfuric acid, nickel(2+) salt (1:1)
CAS number: 7786-81-4
Version: 1.0, Date of issue: 2015-12-09, p. 6 of 7
Safety Data Sheet
Electroless Cobalt Plating Solution Part A
California Prop. 65 components
Common name: NICKEL SULFATE
CAS number: 7786-81-4
California Prop. 65 components
Chemical name: COBALT SULFATE HEPTAHYDRATE
CAS number: 10026-24-1
06/02/2000 - cancer
HMIS Rating
Electroless Cobalt Plating Solution Part
A
HEALTH 2
FLAMMABILITY 1
PHYSICAL HAZARD 1
PERSONAL PROTECTION C
NFPA Rating
SECTION 16: Other information
16.1 Further information/disclaimer
DISCLAIMER: The information above is believed to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with
respect to such information, and we assume no liability resulting from its use. Users should make their own
investigation to determine the suitability of information for their particular purposes. In no event shall Caswell Inc
be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental,
consequential or exemplary damages, whatsoever arising, even if Caswell Inc has been advised of the possibility
of such damages.
Version: 1.0, Date of issue: 2015-12-09, p. 7 of 7