CASWELL INC
Safety Data Sheet
Nickel Anode
SECTION 1: Identification
1.1 Product identifier
Product name Nickel Anode
Product number NKANOD
Brand Caswell
1.4 Supplier's details
Name Caswell Inc
Address 7696 Route 31
Lyons NY 14489
USA
Telephone 315 946 1213
Fax 315 946 4456
email sales@caswellplating.com
1.5 Emergency phone number(s)
Office Hours (9-4ET): 315 946 1213
24 Hour: CHEMTEL US# 1-800-255-3924 Intl# +01-813-248-0585
SECTION 2: Hazard identification
2.1 Classification of the substance or mixture
GHS classification in accordance with: OSHA (29 CFR 1910.1200)
- Sensitization, skin (C.4.7), Cat. 1
- Carcinogenicity (C.4.9), Cat. 2
- Specific target organ toxicity (repeated exposure) (C.4.12), Cat. 1
2.2 GHS label elements, including precautionary statements
Pictogram
Version: 1.0, Date of issue: 2019-01-24, p. 1 of 7
Safety Data Sheet
Nickel Anode
Signal word Danger
Hazard statement(s)
H317 May cause an allergic skin reaction
H351 Suspected of causing cancer [route]
H372 Causes damage to organs [organs] through prolonged or repeated exposure
[route]
Precautionary statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P272 Contaminated work clothing must not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P321 Specific treatment (see … on this label).
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents/container to …
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P405 Store locked up.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P264 Wash … thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P314 Get medical advice/attention if you feel unwell.
SECTION 3: Composition/information on ingredients
3.2 Mixtures
Hazardous components
1. NICKEL POWDER
Concentration Not specified
EC no. 231-111-4
CAS no. 7440-02-0
Index no. 028-002-00-7
- Carcinogenicity (C.4.9), Cat. 2
- Sensitization, skin (C.4.7), Cat. 1
H317 May cause an allergic skin reaction
H351 Suspected of causing cancer [route]
SECTION 4: First-aid measures
Version: 1.0, Date of issue: 2019-01-24, p. 2 of 7
Safety Data Sheet
Nickel Anode
4.1 Description of necessary first-aid measures
General advice Under normal handling and use, exposure to solid forms of this material
present few health haz-ards. Subsequent operations such as grinding,
melting or welding may produce hazardous dust or fumes which can be
inhaled or come in contact with the skin or eyes. Emergency responders
should take care to avoid secondary exposure to nickel particulate. Wear
appropriate protective equipment.
If inhaled In case of accident by inhalation: remove casualty to fresh air and keep at
rest.
In case of skin contact After contact with skin, wash immediately with plenty of water
In case of eye contact Flush eyes with lukewarm water, including under upper and lower eyelids, for
at least 15 minutes. Seek medical attention.
If swallowed If swallowed, do not induce vomiting: seek medical advice immediately and
show this container or label.
SECTION 5: Fire-fighting measures
5.1 Suitable extinguishing media
Use media suitable to extinguish surrounding fire.
5.2 Specific hazards arising from the chemical
This product does not present fire or explosion hazards as shipped. Fine dust from processing may ignite if allowed
to accumulate and subjected to an ignition source. When heated to high temperatures, nickel oxide may be
produced, keep containers cool with water spray.
5.3 Special protective actions for fire-fighters
Full face, self-contained breathing apparatus and full protective clothing when necessary.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate respiratory and protective equipment specified in section 8. Avoid creating dusts. Avoid breathing
dust or fume. Isolate spill area and provide ventilation.
6.2 Environmental precautions
Do not allow to enter drains or to be released to the environment.
6.3 Methods and materials for containment and cleaning up
For larger pieces - pick up mechanically. For chips or dust - vacuum spill using a system equipped with a HEPA
filtration system and place in properly labeled closed containers. Special precautions must be taken when changing
filters on HEPA vacuum cleaners used to clean up hazardous materials. Caution should be taken to minimize
airborne generation of particulate and avoid contamination of air and water.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Version: 1.0, Date of issue: 2019-01-24, p. 3 of 7
Safety Data Sheet
Nickel Anode
Handle in a well-ventilated area. Avoid creating dust. Avoid exposure to high temperature. Avoid breathing dust or
fumes. Avoid contact with skin and eyes. Wash thoroughly before eating or smoking. See section 8 for infor-mation
on personal protection equipment.
7.2 Conditions for safe storage, including any incompatibilities
Store in a sealed container. Store in a cool, dry area. See sec-tion 10 for more information on incompatible materials
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
1. Nickel, metal and insoluble compounds (as Ni) (CAS: 7440-02-0)
PEL (Inhalation): 1 mg/m3 (OSHA)
OSHA Annotated Table Z-1, www.osha.gov
PEL (Inhalation): metal 0.5 mg/m3, insoluble 0.1 mg/m3 (Cal/OSHA)
OSHA Annotated Table Z-1, www.osha.gov
REL (Inhalation): Ca, 0.015 mg/m3, See Appendix A (NIOSH)
OSHA Annotated Table Z-1, www.osha.gov
2. Nickel, soluble compounds (as Ni) (CAS: 7440-02-0)
PEL (Inhalation): 1 mg/m3 (OSHA)
OSHA Annotated Table Z-1, www.osha.gov
PEL (Inhalation): 0.05 mg/m3 (Cal/OSHA)
OSHA Annotated Table Z-1, www.osha.gov
REL (Inhalation): Ca 0.015 mg/m3 (NIOSH)
OSHA Annotated Table Z-1, www.osha.gov
8.2 Appropriate engineering controls
Local exhaust ventilation or other engineering controls are normally required when handling or using this product to
avoid overexposure.
8.3 Individual protection measures, such as personal protective equipment (PPE)
Pictograms
Eye/face protection
Goggles
Skin protection
Gloves
Body protection
Labcoat
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Version: 1.0, Date of issue: 2019-01-24, p. 4 of 7
Safety Data Sheet
Nickel Anode
Appearance/form (physical state, color, etc.) Solid sheet
Odor None
Odor threshold No data available
pH No data available
Melting point/freezing point 2651F
Initial boiling point and boiling range 5252F
Flash point na
Evaporation rate na
Flammability (solid, gas) na
Upper/lower flammability limits
Vapor pressure 1mm Hg at 3290°F (1810°C)
Vapor density No data available
Relative density 8.9 g/cc
Solubility(ies) Insoluble in water
Partition coefficient: n-octanol/water No data available
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No data available
Explosive properties No data available
Oxidizing properties No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
Stable
10.2 Chemical stability
Stable
10.3 Possibility of hazardous reactions
High temperatures will generate toxic cadmium oxide fumes.
10.5 Incompatible materials
Acids, aluminum alloys, ammonia, oxidizers, sulfur
SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
Repeated exposure may cause dermatitis.
Serious eye damage/irritation
No data available
Respiratory or skin sensitization
No data available
Version: 1.0, Date of issue: 2019-01-24, p. 5 of 7
Safety Data Sheet
Nickel Anode
Germ cell mutagenicity
No data available
Carcinogenicity
IARC NTP OSHA
Listed Listed Listed
Reproductive toxicity
No data available
Summary of evaluation of the CMR properties
There is evidence of a sensitization effect. Target organ effects: certain forms of this product are considered
carcinogens.
STOT-single exposure
No data available
STOT-repeated exposure
May cause dermatitis on exposed skin.
SECTION 12: Ecological information
Toxicity
96 HR LC50 BRACHYDANIO RERIO > 100 MG/L
96 HR LC50 CYPRINUS CARPIO 10.4 MG/L (STATIC)
48 HR EC50 DAPHNIA MAGNA > 100 MG/L
48 HR EC50 DAPHNIA MAGNA > 1 MG/L (STATIC)
72 HR EC50 PSEUDOKIRCHNERIELLA SUBCAPITATA 0.18 MG/L
Other adverse effects
Moderate ecological hazard. This product may be hazardous to plants and/or wildlife. Keep out or waterways.
SECTION 13: Disposal considerations
Disposal of the product
Dispose in accordance with all applicable Federal, State and Local regulations. Always contact a
permitted waste disposer (TSD) to assure compliance
Disposal of contaminated packaging
Dispose in accordance with all applicable Federal, State and Local regulations. Always contact a
permitted waste disposer (TSD) to assure compliance
SECTION 14: Transport information
DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Version: 1.0, Date of issue: 2019-01-24, p. 6 of 7
Safety Data Sheet
Nickel Anode
Not dangerous goods
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations specific for the product in question
Massachusetts Right To Know Components
Chemical name: Nickel
CAS number: 7440-02-0
New Jersey Right To Know Components
Common name: NICKEL
CAS number: 7440-02-0
Pennsylvania Right To Know Components
Chemical name: Nickel
CAS number: 7440-02-0
California Prop. 65 components
Chemical name: NICKEL POWDER
CAS number: 7440-02-0
10/01/1989 - Cancer
HMIS Rating
Nickel Anode
HEALTH 3
FLAMMABILITY 0
PHYSICAL HAZARD 0
PERSONAL PROTECTION C
NFPA Rating
SECTION 16: Other information
Version: 1.0, Date of issue: 2019-01-24, p. 7 of 7