CASWELL INC
Safety Data Sheet
Plastic Plating Reducer
SECTION 1: Identification
1.1 Product identifier
Product name Plastic Plating Reducer
Product number PLR
Brand Caswell
1.4 Supplier's details
Name Caswell Inc
Address 7696 Route 31
Lyons NY 14489
USA
Telephone 315 946 1213
Fax 315 946 4456
email sales@caswellplating.com
1.5 Emergency phone number(s)
Office Hours (9-4ET): 315 946 1213
24 Hour: CHEMTEL US# 1-800-255-3924 Intl# +01-813-248-0585
SECTION 2: Hazard identification
2.1 Classification of the substance or mixture
- Skin sensitizer (chapter 3.4), Cat. 1
- Carcinogenicity (chapter 3.6), Cat. 1A
- Toxic to reproduction (chapter 3.7), Cat. 1B
2.2 GHS label elements, including precautionary statements
Pictogram
Hazard statement(s)
Version: 1.0, Date of issue: 2015-10-20, p. 1 of 6
Safety Data Sheet
Plastic Plating Reducer
H317 May cause an allergic skin reaction
H350 May cause cancer [route]
H360 May damage fertility or the unborn child [effect, route]
Precautionary statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P321 Specific treatment (see … on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents/container to …
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P405 Store locked up.
SECTION 3: Composition/information on ingredients
3.1 Substances
Hazardous components
1. WATER OR OTHER NON-REPORTABLE INGREDIENTS
Concentration 99.8 - 99.9 %
CAS no. 7732-18-5
2. NICKEL (II) SULFATE
Concentration 0.01 - 0.02 % (weight)
EC no. 232-104-9
CAS no. 7786-81-4
Index no. 028-009-00-5
SECTION 4: First-aid measures
4.1 Description of necessary first-aid measures
General advice Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled If breathed in, move person into fresh air. If not breathing, give artificial
respiration.
In case of skin contact Skin Protection: None required with normal household use. Industrial
Setting: Protective gloves (for hands) and protective clothing are required
where repeated or prolonged skin contact may occur.
In case of eye contact Distribution, Workplace and Household Settings: No special protective
equipment required. Product Manufacturing Plant (needed at Product-
Producing Plant ONLY): Use appropriate eye protection.
If swallowed Drink water and induce vomiting.
Version: 1.0, Date of issue: 2015-10-20, p. 2 of 6
Safety Data Sheet
Plastic Plating Reducer
Personal protective equipment for first-aid responders
None required
4.2 Most important symptoms/effects, acute and delayed
Product is not hazardous. No negative effects from exposure should be expected.
SECTION 5: Fire-fighting measures
5.1 Suitable extinguishing media
Any available
5.2 Specific hazards arising from the chemical
None
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Product is not hazardous. Clean up using available means.
6.2 Environmental precautions
None
6.3 Methods and materials for containment and cleaning up
Any
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of
workday.
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
1. NICKEL (II) SULFATE (CAS: 7786-81-4)
8.3 Individual protection measures, such as personal protective equipment (PPE)
Pictograms
Body protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the
specific work-place., The type of protective equipment must be selected according to the concentration and amount
of the dangerous substance at the specific workplace.
Respiratory protection
Ensure adequate ventilation. Use personal protective equipment. Avoid dust formation. For personal protection see
section 8.
Version: 1.0, Date of issue: 2015-10-20, p. 3 of 6
Safety Data Sheet
Plastic Plating Reducer
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance/form (physical state, color, etc.) Pale Green Solution
Odor None
Odor threshold Not Established
pH Not Established
Melting point/freezing point Not Established
Initial boiling point and boiling range 212 deg F
Flash point Not Flammable
Evaporation rate Not Established
Flammability (solid, gas) None
Upper/lower flammability limits Not Established
Vapor pressure Not Established
Vapor density Not Established
Relative density Not Established
Solubility(ies) Fully In Water
Partition coefficient: n-octanol/water Not Established
Auto-ignition temperature n/a
Decomposition temperature
Viscosity
Explosive properties
Oxidizing properties
Other safety information
VOC=0
SECTION 10: Stability and reactivity
10.1 Reactivity
Not reactive
10.2 Chemical stability
Stable
10.3 Possibility of hazardous reactions
None Known
10.4 Conditions to avoid
None Known
10.5 Incompatible materials
None Known
10.6 Hazardous decomposition products
None Known
SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
Not Established
Version: 1.0, Date of issue: 2015-10-20, p. 4 of 6
Safety Data Sheet
Plastic Plating Reducer
Skin corrosion/irritation
Not Established
Serious eye damage/irritation
Not Established
Respiratory or skin sensitization
Not Established
Germ cell mutagenicity
Not Established
Carcinogenicity
Not Established
Reproductive toxicity
Not Established
STOT-single exposure
Not Established
STOT-repeated exposure
Not Established
Aspiration hazard
Not Established
SECTION 12: Ecological information
Toxicity
Not Established
SECTION 13: Disposal considerations
Disposal of the product
Consult appropriate federal and local regulations for disposal. Empty containers are subject to the same regulations.
Disposal of contaminated packaging
Consult appropriate federal and local regulations for disposal. Empty containers are subject to the same regulations.
SECTION 14: Transport information
DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods
SECTION 15: Regulatory information
Version: 1.0, Date of issue: 2015-10-20, p. 5 of 6
Safety Data Sheet
Plastic Plating Reducer
15.1 Safety, health and environmental regulations specific for the product in question
Massachusetts Right To Know Components
Chemical name: Nickel sulfate
CAS number: 7786-81-4
New Jersey Right To Know Components
Common name: NICKEL SULFATE
CAS number: 7786-81-4
Pennsylvania Right To Know Components
Chemical name: Sulfuric acid, nickel(2+) salt (1:1)
CAS number: 7786-81-4
California Prop. 65 components
Chemical name: NICKEL (II) SULFATE
CAS number: 7786-81-4
05/07/2004 - Cancer
HMIS Rating
Plastic Plating Reducer
HEALTH 1
FLAMMABILITY 0
PHYSICAL HAZARD 0
PERSONAL PROTECTION X
NFPA Rating
SECTION 16: Other information
16.1 Further information/disclaimer
DISCLAIMER: The information above is believed to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with
respect to such information, and we assume no liability resulting from its use. Users should make their own
investigation to determine the suitability of information for their particular purposes. In no event shall Caswell Inc be
liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental,
consequential or exemplary damages, whatsoever arising, even if Caswell Inc has been advised of the possibility of
such damages.
Version: 1.0, Date of issue: 2015-10-20, p. 6 of 6