Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Safety Data Sheet
Section 1: Identification
Product Identifier and Other Means of Identification
Product Name: Super Shield Silver Coated Copper Conductive Coating
SDS Code: 843–Aerosol
Related Part # 843-140G, 843-340G
Recommended Use and Restriction on Use
Use: A coating for reducing EMI/RFI interference.
Uses Advised Against: Not available
Details of Manufacturer or Importer
Manufacturer
MG Chemicals MG Chemicals (Head Office)
1210 Corporate Drive 9347-193 Street
Burlington, Ontario L7L 5R6 Surrey, British Columbia V4N 4E7
CANADA CANADA
+1-800-340-0772 +1-905-331-1396
FAX +1-800-340-0773 FAX +1-905-331-2682
E-MAIL support@mgchemicals.com E-MAIL info@mgchemicals.com
WEB www.mgchemicals.com
E-MAIL (Competent Person): sds@mgchemicals.com
Emergency Phone Number
For hazardous material incidents ONLY—leaks, spills, fires, exposures or accidents
USA or CANADA: Call CHEMTREC : +1-800-424-9300
For emergencies involving dangerous goods; Collect 24/7
CANADA: Call CANUTEC : +1-613-996-6666 or *666 on cellular phones
Page 1 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 2: Hazard(s) Identification
Classification of Hazardous Chemical
GHS Categories
Criteria Category Signal Word Pictograms
Flammable Aerosol 2 Warning Flame
Gas Under Pressure Liquefied Gas Liquefied Gas Warning Gas Cylinder
Eye Irritation 2 Warning Exclamation
Specific Target Organ Toxicity Single Exposure 3 Warning Exclamation
Reproductive Toxicity 2 Warning Health
Specific Target Organ Toxicity Repeated Exposure 2 Warning Health
Environmental Hazard Chronic Aqua. Tox. 1 Warning Environment
Note: The degree of severity is ranked within each hazard class from
1 (Highest Severity) to up to 5 (Lowest Severity), which is opposite to HMIS and NFPA
conventions. Severity category rankings do not allow comparisons between classes.
Label Elements
Signal Word WARNING
Pictograms Hazard Statements
H223: Flammable aerosol
H229: Pressurized container: may burst if heated
H319: Causes serious eye irritation
H336: May cause drowsiness or dizziness
Section continued on the next page
Page 2 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Continued…
Pictograms Hazard Statements
H361: Suspected of damaging fertility or the unborn child
H373: May cause damage to organs (inner ear or central nervous system)
through prolonged or repeated exposure
H410: Very toxic to aquatic life with long lasting effects
Prevention Precautionary Statements
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, flames, and other ignition
sources. No Smoking.
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P260 + P271 Do not breathe mist/vapors/spray. Use only outdoors or in a well-
ventilated area.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear protective gloves/eye protection/face protection.
P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
Response Precautionary Statements
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for
+ P312 breathing. Call a POISON CENTRE/doctor if you feel unwell.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P305 + P351 IF IN EYES: Rinse cautiously with water for several minutes. Remove
+ P338 contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P391 Collect spillage.
Section continued on the next page
Page 3 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Continued…
Storage Precautionary Statements
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C
[122 °F].
P403 Store in well-ventilated place.
P405 Store locked up.
Disposal Precautionary Statements
P501 Dispose of contents/container in accordance to local/regional/international
regulations.
Hazards Not Otherwise Classified
Other Hazard Statements/Precautionary Signal Pictograms
Criteria Statement Word
Defats skin Repeated exposure may cause skin dryness None None
or cracking.
Argyria Long term exposure to silver powder or None None
compounds can lead to an irreversible blue-
grey discoloration of the skin.
Section 3: Composition/Information on Ingredients
CAS # Chemical Name %(weight)
811-97-2 1,1,1,2-tetrafluoroethane 38%
67-64-1 acetone 27%
7440-50-8 copper 18%
108-88-3 toluene 5%
7440-22-4 silver 2%
110-19-0 isobutyl acetate 1%
110-43-0 heptan-2-one a) 1%
64-17-5 ethanol 1%
a) Also known as methyl amyl ketone (MAK)
Page 4 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 4: First-Aid Measures
Exposure Condition GHS Code/Symptoms/Precautionary Statements
IF INHALED P304 + P340, P312, P308 + P313
Immediate Symptoms drowsiness, dizziness, cough, headaches, nausea,
unconsciousness
Response Remove person to fresh air and keep comfortable for breathing.
If you feel unwell: Call a POISON CENTRE/doctor.
IF exposed or concerned: Get medical advice/attention.
IF IN EYES P305 + P351 + P338, P337 + P313
Immediate Symptoms irritation, redness
Response Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF SWALLOWED P301 + P330, P331
Immediate Symptoms nausea, sore throat, diarrhea, drowsiness, dizziness
Response IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF exposed or concerned: Get medical advice/attention.
IF ON SKIN P302 + P352, P332 + P313
Immediate Symptoms redness, mild irritation, dry skin
Response IF ON SKIN: Wash with plenty of water.
If skin irritation occurs: Get medical advice/attention.
Section 5: Fire-Fighting Measures
Extinguishing Media In case of fire: Use dry chemical, carbon dioxide, chemical foam,
or water spray to extinguish.
Use water spray to cool containers.
Specific Hazards Aerosols containers may erupt with force at temperatures above
50 °C [122 °F].
Produces irritating and toxic fumes in fires or in contact with hot
surfaces.
The vapors are heavier than air and may accumulate in low-lying
areas. Vapors may travel long distances and ignite at an ignition
source, which can cause a flashback or an explosion.
Section continued on the next page
Page 5 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Combustion Products Produces carbon oxides (CO,CO2), metal oxide fumes,
halogenated compounds, and hydrogen fluorides.
Fire-Fighter Wear self-contained breathing apparatus and full fire-fighting
turn-out gear.
Section 6: Accidental Release Measures
Personal Protection See personal protection recommendations in Section 8.
Precautions for Do not breathe the mist/spray/vapors. Remove or keep away all
Response sources of extreme heat or open flames.
Environmental Avoid releasing to the environment. Prevent spill from entering
Precautions drains and waterways.
Containment Methods Not applicable
Cleaning Methods Collect liquid in a sealable, solvent-resistant container. Sprinkle
inert absorbent compound onto spill, then sweep into the
container. Wash spill area with soap and water to remove the
last traces of residue.
Disposal Methods Dispose of spill waste according to Section 13.
Page 6 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 7: Handling and Storage
Prevention Keep out of reach of children.
Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood.
Do not spray on open flame or other ignition source.
Do not pierce or burn, even after use.
Do not breathe mist/vapors/spray. Use only outdoors or in a well-
ventilated area.
Do not eat, drink, or smoke when using this product.
Handling Wear protective gloves/clothing/eye protection.
Take off contaminated clothing and wash it before reuse.
Wash hands thoroughly after handling.
Avoid release to the environment.
Collect spillage.
Storage Protect from sunlight. Do not expose to temperatures exceeding 50 °C
[122 °F]. Store in well ventilated place.
Store locked up.
Section 8: Exposure Controls/Personal Protection
Substances with Occupational Exposure Limit Values
Chemical Name Country/ Long Term Short Term
Provinces Exposure Limits Exposure Limits
(PEL) (STEL)
1,1,1,2- MG Chemicals a) 1 000 ppm Not established
tetrafluoroethane ACGIH Not established Not established
U.S.A. OSHA PEL Not established Not established
Canada Not established Not established
Section continued on the next page
Page 7 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Continued…
Chemical Name Country/ Long Term Short Term
Provinces Exposure Limits Exposure Limits
(PEL) (STEL)
acetone ACGIH 500 ppm 750 ppm
U.S.A. OSHA PEL 1000 ppm Not established
Canada AB 500 ppm 750 ppm
Canada BC 250 ppm 500 ppm
Canada ON 500 ppm 750 ppm
Canada QC 750 ppm 1000 ppm
copper ACGIH 1.0 mg/m3 Not established
(dust and mist) U.S.A. OSHA PEL 1.0 mg/m3 Not established
Canada AB 1 mg/m3 Not established
Canada BC 1.0 mg/m3 Not established
Canada ON 1 mg/m3 Not established
Canada QC 1 mg/m3 Not established
toluene ACGIH 20 ppm Not established
U.S.A. OSHA PEL 200 ppm 300 ppm
Canada AB 50 ppm Not established
Canada BC 20 ppm Not established
Canada ON 20 ppm Not established
Canada QC 100 ppm 150 ppm
silver ACGIH 0.1 mg/m3 Not established
(metal dust, mist) U.S.A. OSHA PEL 0.01 mg/m3 Not established
(metal) Canada AB 0.1 mg/m3 Not established
(Ag and its compounds) Canada BC 0.01 mg/m3 0.03 mg/m3
(metal, dust, fumes) Canada ON 0.1 mg/m3 Not established
Canada QC 0.1 mg/m3 Not established
isobutyl acetate ACGIH 150 ppm Not established
U.S.A. OSHA PEL 150 ppm Not established
Canada AB 150 ppm Not established
Canada BC 150 ppm Not established
Canada ON 150 ppm Not established
Canada QC 150 ppm Not established
heptan-2-one ACGIH 50 ppm Not established
methy amyl ketone U.S.A. OSHA PEL 100 ppm Not established
Canada AB 50 ppm Not established
Canada BC 50 ppm Not established
Canada ON 25 ppm Not established
Canada QC 50 ppm Not established
ethanol ACGIH 1 000 ppm Not established
U.S.A. OSHA PEL 1 000 ppm Not established
Canada AB 1 000 ppm Not established
Canada BC Not established 1 000 ppm
Canada ON Not established 1 000 ppm
Canada QC 1 000 ppm Not established
Section continued on the next page
Page 8 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Note: Ingredients are listed in descending weight contribution order (from greatest to
least). The ACGIH1, OSHA (Table Z-1), and Canadian provinces exposure limits were
consulted. Limits from by RTECS database2 of the Canadian Centre for Occupational
Health and Safety (CCOHS) a data from suppliers’ SDS were also consulted. Short term
exposure limits (STEL) are for 15 min and long term permissible exposure limits
(PEL) for 8 h.
Engineering Controls
Ventilation Keep airborne concentrations below the occupational exposure
limits (OEL).
Personal Protective Equipment
Eye protection Wear appropriate protective eyeglasses or chemical safety
goggles.
Recommendation: Ensure that glasses have side shields for
lateral protection.
Skin Protection For likely contacts, use of protective butyl rubber, fluorinated
rubber,or other chemically resistant gloves.
For incidental contacts, use nitrile, neoprene, PVC gloves, or
other chemically resistant gloves.
Respiratory Protection For over-exposures up to 10 x OEL of mist/vapors/spray, wear
respirator such as a half-mask respirator with organic vapor
cartridges.
Above 10 x OEL, use a positive-pressure, air-supplied respirator
or a self-contained breathing apparatus.
RECOMMENDATION : Consult your local safety supply store to
ensure your respirator has filter cartridges appropriate for the
ingredients listed in section 3 of this SDS, and that the
respirator is fitted to the employee by a professional.
General Hygiene Considerations
Wash hands thoroughly with water and soap after handling.
Page 9 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 9: Physical and Chemical Properties
Physical State Liquid, in aerosol Lower Flammability 1%
format Limit b)
Appearance Light brown Upper Flammability 11%
metallic Limit b)
Odor Benzene like, Vapor Pressure 69 hPa
sweetish @20 °C [52 mmHg]
Odor Threshold a) 2 ppm Vapor Density a) 4.1
(Air =1)
pH 7 Specific Gravity 1.70
@25 °C
Freezing/Melting Not Solubility in Partially soluble
Point available Water
Boiling Point a) 56 °C Partition Not
[132 °F] Coefficient available
Flash Point a) -16 °C Auto-ignition 465 °C
[3.2 °F] Temperature a) [869 °F]
Evaporation fast Decomposition Not
Rate Temperature available
Flammability Not Viscosity Not
(solid, gas) available @40 °C available
a) Values based on acetone component.
b) Lower and Upper Explosive Limits of mixture calculated using Le Chatelier principle and
component LFL and UFL limits
Section 10: Stability and Reactivity
Reactivity Not available
Chemical Stability Chemically stable at normal temperatures and pressures
Conditions to Temperatures above 50 °C [122 °F], open flames, and incompatible
Avoid substances
Incompatibilities Oxidizing agents, strong acids, peroxides, alkali or alkali earth metals
Polymerization Will not occur
Decomposition Will not decompose under normal conditions. For thermal
decomposition, see combustion products in Section 5.
Page 10 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 11: Toxicological Information
Routes of Exposure
Eye contact, Ingestion, Inhalation, and Skin contact
Symptoms Summary
Eyes May cause redness and severe irritation.
Skin Acetone, toluene, and ethanol are known serious eye irritant.
Inhalation May cause drowsiness, dizziness, cough, headaches, nausea,
unconsciousness.
Ingestion May cause nausea, sore throat, and diarrhea (see inhalation symptoms).
Chronic Prolonged or repeated exposure may cause skin dryness, cracking, as well
as defatting the skin.
Chronic inhalation exposure may effect the central nervous system and
lead to hearing loss with co-exposure to loud noises.
Ingestion or inhalation of paint material, mist, or vapor during pregnancy
may increase the chances fetal death and developmental defects.
Acute Toxicity (Lethal Exposure Concentrations)
Chemical Name LD50 LD50 LC50 inhalation
oral dermal
1,1,1,2-tetrafluoroethane Not Not 1 500 g/m3
available available 4 h Rat
acetone 5 800 mg/kg 20 mL/kg 16 000 ppm
Rat Rabbit a) 6h Rat
copper >5 000 mg/kg Not Not
Mouse available available
toluene 636 mg/kg 12 124 mg/kg 49 g/m3
Rat Rabbit 4h Rat
silver >5 g/kg Not Not
Guinea Pig available available
isobutyl acetate 13 400 mg/kg >17 400 mg/kg >13.24 mg/L
Rat Rabbit 6 h Rat
heptan-2-one 1 670 mg/kg 12 600 L/kg Not
Rat Rabbit available
Section continued on the next page
Page 11 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Continued…
Chemical Name LD50 LD50 LC50 inhalation
oral dermal
ethanol 7 060 mg/kg Not available 20 000 ppm
Rat 10 h Rat
Note: Toxicity data from the RTECS2 and ECHA databases were consulted. The data from
supplier (M)SDS were also consulted.
a) Supplier MSDS
Other Toxicological Effects
Skin corrosion/irritation Based on available data, the classification criteria are not
met.
Serious eye Acetone and ethanol are known serious eye irritants.
damage/irritation
Sensitization Based on available data, the classification criteria are not
(allergic reactions) met.
Carcinogenicity Evidence of carcinogenicity of ethanol relates to
(risk of cancer) excessive alcoholic beverage consumption, and doesn’t
relate to exposure risks when used in the workplace or as
a non-comestible consumer product.
Ethanol [64-17-5]
IARC Group 1: Carcinogenic to human when consumed
as beverage.
ACGIH A3: Confirmed animal carcinogen with unknown
relevance to humans
CA Prop 65: Listed as a carcinogen when consumed as a
beverage
NTP: Not listed
Mutagenicity Based on available data, the classification criteria are not
(risk of heritable genetic effects) met.
Reproductive Toxicity Toluene and ethanol present reproductive and
(risk to sex functions) developmental hazards at high doses (>13,000 g/day)
Section continued on next page
Page 12 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Teratogenicity (risk of fetus Harmful to unborn fetus
malformation)
STOT-single exposure Acetone, toluene, isobutyl acetate, and methy amyl ketone
can affect the central nervous system by inhalation
causing drowsiness or dizziness.
STOT-repeated exposure Contains 5% toluene, which is a Cat 2 STOT repeated
exposure hazard for the central nervous system and
cochlear systems. Toluene is ototoxic chemicals according
to rat studies: inhalation exposure in the presence of noise
may lead to cochlear impairment.
Aspiration hazard Based on available data, the classification criteria are not
met. There is less than 10% category 1 components, and
the kinematic viscosity is >20.5 mm2/s at 40 °C.
Section 12: Ecological Information
The IMDG Code criteria, the raw-material safety data sheets, and supporting data from the
European Chemical Agency database (http://echa.europa.eu) were used to support the
classification.
Contains silver and copper particles of less than a 1 mm but more than 100 nm (larger than
nanoparticles), which release ionic silver and ionic copper levels that are very toxic to the
environment. While massive silver and copper are insoluble in water, their powders are
considered sufficiently soluble to give rise to an ecological hazard by EU regulators. The
classification that follows takes into account to chronic aqueous toxicity of category 1
(M = 10 for silver and M = 1 for copper) of the EU.
Toluene is an acute category 2 environmental toxicant (with minimal LC50 of 7.63 mg/L for
Oncorhhynchus mykiss (rainbow trout); 8.9 mg/L 24 h Daphnia magna (water flea); 10
mg/L 24 h Pseudokirchneriella subcapitata (green algae)).
Acetone, isobutyl acetate, heptan-2-one, ethanol are not classifiable as an environmental
toxicant (with minimal LC50 of >100 mg/L).
Acetone has a minimal LC50 96 h of 5 540 mg/L for Oncorhhynchus mykiss (rainbow
trout) and an EC50 48 h of 13 500 mg/L for Daphnia magna (water flea).
Isobutyl acetate as a minimal LC50 48 h of 101 mg/L for Leuciscus idus melanotus
and 250 mg/L for Daphnia magna (water flea).
Heptan-2-one has a minimal LC50 96 h of 126 mg/L for Pimephales promelas
(fathead minnow).
Ethanol is biodegradable and has a minimal LC50 of >1 000 mg/L for fish,
invertebrates, and algea.
Section continued on the next page
Page 13 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Acute Ecotoxicity
Category 1
Very toxic to aquatic life
Chronic Ecotoxicity
Category 1
Very toxic to aquatic life with long lasting effects
Avoid release to the environment. Collect spillage.
Biodegradability
Expected to be biodegrable. The volatile solvent constituents will oxidize rapidly in air by
photochemical reaction.
Other Effects
Actual VOC (Volatile Organic Compounds) content according to the US (EPA) and Canadian
(CEPA) authorities.
VOC = 10% [98 g/L]
Section 13: Disposal Information
Dispose of contents in accordance with all local, regional, national, and international
regulations.
Page 14 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 14: Transport Information
Ground
Refer to TDG (Canadian Transportation of Dangerous Goods regulations) and
USA DOT 49 CFR (Parts 100 to 185) Regulations.
Limited Quantity UN number: UN1950
Shipping Name:
AEROSOLS, flammable
Class: 2.1
Packing Group: Not applicable
Marine Pollutant: No
Air
Refer to ICAO-IATA Dangerous Goods Regulations.
Limited Quantity UN number: UN1950
See package Shipping Name:
instruction Y203 AEROSOLS, flammable
Class: 2.1
Max Net Qty/Pkg Packing Group: Not applicable
30 kg G Marine Pollutant: No
Sea
Refer to IMDG regulations.
Limited Quantity UN number: UN1950
Shipping Name:
AEROSOLS, flammable
Class: 2.1
Packing Group: Not applicable
Marine Pollutant: No
Note: Shipper must be appropriately trained and certified before involvement with
the transport of dangerous goods.
Page 15 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Section 15: Regulatory Information
Canada
WHMIS 1988 Classification
A – Aerosol Container; B5 – Flammable Aerosols;
D2A – Very Toxic (Embryotoxicant);
D2B – Toxic Other (Eye Irritant)
Domestic Substance List (DSL) / Non-Domestic Substance Lists (NDSL)
All hazardous ingredients are listed on the DSL.
Industry and Science Canada
MG Labels products intended for the workplace to conform to WHMIS labeling
regulations. Product identification, net quantity declaration, minimum printing type
size heights, and packaging of this product are in compliance.
Health Canada
Products produced by MG Chemicals intended for retail display conform to the
Canadian Consumer Labeling Regulations.
USA
Other Classifications
HMIS® RATING NFPA® 704 CODES
HEALTH: * 2
3
FLAMMABILITY: 3
2 0
PHYSICAL HAZARD: 0
PERSONAL PROTECTION:
Approximate HMIS and NFPA Risk Ratings Legend:
0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
Section continued on the next page
Page 16 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depleting substances.
This product does not contain any class 2 ozone depleting substances.
This product contains toluene, which is listed as hazardous air pollutants.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45)
This product contains toluene (CAS# 108-88-3; reportable quantity = 1000 lb),
which is subject to the reporting requirements of section 313 Title III of the SARA of
1986 and 40 CFR part 372.
This product contains acetone (CAS# 67-64-1), and isobutyl acetate
(CAS# 110-19-0), which are subject to the CERCLA reporting requirements at the
5000 lb (2268 kg) threshold.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
California Proposition 65 (Chemicals known to cause cancer or reproductive toxicity,
June 06, 2014 revision, USA).
This product contains toluene, which is listed as reproductively toxic.
This product contains ethanol, which is listed as reproductively toxic. It is also listed
as a carcinogen when in an alcoholic beverage.
Europe
RoHS (Restriction of Hazardous Substances Directive)
This product does not contain any lead, cadmium, mercury, hexavalent chromium,
PBB’s, or PBDE’s, and complies with European RoHS regulations.
WEEE (Waste Electrical and Electronic Equipment Directive)
This product is not a piece of electrical or electronics equipment, and is therefore not
governed by this regulation.
Section 16: Other Information
SDS Prepared by Michel Hachey
Date of Review 19 November 2015
Supersedes 06 April 2015
Reason for Changes: Addition of part number and minor format changes.
Section continued on the next page
Page 17 of 18
Date of Revision: 19 November 2015 / Ver. 3.01
Quality System Certified to ISO 9001:2008
SAI Global File #004008
Burlington, Ontario, Canada
SILVER COATED COPPER CONDUCTIVE COATING 843-AEROSOL
Reference
1) ACGIH 2013 TLVs and BEIs: Based on the documentation of the threshold limit values for
chemical substances and physical agents & biological exposure indices, American
Conference of Governmental of Industrial Hygienist Cincinnati, OH (2013).
2) All toxicological data were checked against the RTECS (Registry of Toxic Effects of
Chemical Substances®)
Abbreviations
ACGIH American Conference of Governmental Industrial Hygienists (USA)
ECHA European Chemicals Agency
EU European Union
EC50 Half maximal effective concentration
EL50 Half maximal effective loading
IARC International Agency for Research on Cancer
NOELR No observable effect loading ratio
NTP National Toxicology Program
GHS Globally Harmonized System of Classification of Labeling of Chemicals
LC50 Lethal Concentration 50%
LCLo Lowest published lethal concentration
LD50 Lethal Dose 50%
OEL Occupational Exposure Limit
PEL Permissible Exposure Limit
SDS Safety Data Sheet
STEL Short-Term Exposure Limit
TCLo Lowest published toxic concentration
TWA Time Weighted Average
VOC Volatile Organic Content
Technical Queries Contact us regarding any questions, improvement suggestions, or
problems with this product. Application notes, instructions, and FAQs
are located at www.mgchemicals.com.
Email: support@mgchemicals.com
Mailing Addresses Manufacturing & Support Head Office
1210 Corporate Drive 9347–193rd Street
Burlington, Ontario, Canada Surrey, British Columbia, Canada
L7L 5R6 V4N 4E7
Disclaimer This material safety data sheet is provided as an information resource only.
M.G. Chemicals, Ltd. believes the information contained herein is accurate
and compiled from reliable sources. It is the responsibility of the user to
query and verify any information seeming suspect where doubt on the validity
may exist. The buyer assumes all responsibility of using and handling the
product in accordance with local, regional, national, and international
regulations.
Page 18 of 18
Date of Revision: 19 November 2015 / Ver. 3.01