What Is Electroless Plating?
Electroless plating requires no power source. The metal is deposited on the part using a complex chemical reaction, rather than being forced onto the part by a power source. Electroless plating usually requires that the solution be heated to high temperatures (190°F) for the reaction to take place.
Related Articles
Electroless Copper Kit Instructions
Instructions For Plating With Our Electroless Copper system, including plating PCB Thru-Holes.
Cost Of Electroless Nickel
If you buy our Jumbo Electroless Nickel, or Electroless Krome kits, the cost of the plating works out to approx $0.50 per square inch, when plated at 1/1000" After the initial purchase of the kit, buying replenishment chemicals by the gallon, the ...
Changes To Electroless Kits
IMPORTANT CHANGES TO INSTRUCTIONS FOR ELECTROLESS NICKEL, KROME, COBALT AND BORON NITRIDE PLATING INSTRUCTIONS Instead of the ceramic heaters mentioned in the plating manual, we now supply glass lined tanks and a thermometer with these kits. The ...
PTFE Electroless Nickel Instructions
7696 Route 31 Lyons NY 14489 Voice: 315.946.1213 Fax: 315.946.4456 www.caswellplating.com PTFE ELECTROLESS NICKEL PTFE or Teflon is an excellent coating for providing low friction values on parts, especially where two parts are sliding together. It ...
Help Calculating Nickel Credits For Electroless Kits
Need help keeping track of and calculating nickel credit replenishments in our Electroless Nickel plating systems. One of our customers has developed this handy piece of software to help you. Software courtesy of White Hat Firearms ...