Instructions
LCD Anodizing Instructions
CASWELL LCD ANODIZING SYSTEM CASWELL INC 7696 ROUTE 31, LYONS NY 14489 USA WWW.CASWELLPLATING.COM SALES@CASWELLPLATING.COM 855-CASWELL © 2020 CASWELL INC CASWELL’S LCD ANODIZING SYSTEM A revolution in Small Scale Anodizing! Provides a durable ...
Plug N Plate® Kit Instructions
Plug N’ Plate® Brush Plating System I am a watchmaker in Scottsdale, Arizona and I specialize in restorations of fine antique watches and clocks. I was recently commissioned to restore a one-of-a-kind French clock, Circa. 1860 which was ornamented ...
How To Buff And Polish
Introduction To Buffing And Polishing Link: http://www.caswellplating.com/buffs/images/Buffbook.pdf
Airbrush Kit Instructions
AIR-BRUSH KIT HOW TO AIR-BRUSH INSTRUCTION BOOK MIXING PAINT You can custom mix any color combination you wish. REMEMBER: Paints must be compatible… that is, mix enamels with enamels, lacquer, etc. Mix thoroughly. Make sure paint is free of ...
Plating Glass
PLATING GLASS TABLEWARE GOLD & & SILVERING GLASS GOLD & SILVER PLATING A typical example of plating on glass is the gilding or silvering of drinking glasses. The following technique should only be considered for better quality glassware. 1. Firstly ...
Aluminum & Copper Polishing Kit
1. For best results, thoroughly clean part to remove all grease and dirt 2. File or Emery paper all deep marks and scratches 3. Use the Sisal wheel (ropelike) and the black emery bar to buff the entire area. Use the cone bob and the black 7696 Route ...
Plating Lead Bullets
Bullet Plating using the Caswell Plating FLASH Copper Kit. by Tom Sweazea (50 Cal Corral Exotic Bullets) –Round Rock, Texas. My hobby and part time business is casting bullets. Specifically, I cast what are known as “Exotic Bullets” for the Smith & ...
Plating A Dummy
7696 Route 31 Lyons NY 14489 Voice: 315.946.1213 Fax: 315.946.4456 www.caswellplating.com Plating A Dummy If you believe that your plating solution has been contaminated, you can plate out those contaminants and restore your bath by “Plating A ...
Bronzing Baby Shoes
Describes the products required for bronzing baby shoes and the procedure to follow.
Surface Area Calculator
Calculate the surface area of two and three dimensional parts. Link: http://www.caswellplating.com/surface.html
Stainless Steel Activator For Gold
Instructions for using our stainless steel activator for gold solution. Enables direct gold plating onto stainless.
Calculating Area For Electroplating
Explains how to calculate surface area of various sized parts. To be used when determining amperage requirements for plating.
Titanium Anodizing
7696 Route 31 Lyons NY 14489 Voice: 315.946.1213 Fax: 315.946.4456 www.caswellplating.com How can I do Titanium Anodizing? For reference only – Caswell Inc. does not support this procedure. Any electrolyte will do: phosphoric, coca-cola, sulfuric ...
SPC-9250 Instruction Sheet
SPC-9250 SWITCH MODE POWER SUPPLY USER’S MANUAL INTRODUCTION The SPC-9250 Switching Mode CC/CV DC Power Supply provides high power output with its small size and lightweight. It's suitable for a wide range of applications such as production testing, ...
Gas Tank Sealer Instructions
7696 Route 31 Lyons NY 14489 USA http://www.caswellplating.com 315-946-1213 Fax 315-946-4456 GAS TANK SEALER Application Instructions READ THIS COMPLETE INSTRUCTION SHEET BEFORE STARTING Preparation 1. All traces of oil and gasoline should first be ...
Surface Area Of Nuts & Bolts
7696 Route 31, Lyons, NY 14489 Voice - (315) 946-1213 Fax - (315) 946-4456 www.caswellplating.com sales@caswellplating.com Calculating Surface Areas for Electroplating Purposes In order to apply the correct amount of current to the work piece, we ...
Surface Area Of Washers
--- Sheet: Sheet1 --- ST'D WASHER SIZE ST'D LOCK WASHER AREA (IN.2) (2) LOCK WASHERS (3) LOCK WASHERS (4) LOCK WASHERS (5) LOCK WASHERS ST'D FLAT WASHER AREA (IN.2) (2) FLAT WASHERS (3) FLAT WASHERS (4) FLAT WASHERS (5) FLAT WASHERS LOCK WASHER O.D. ...
REPROCHROME Plating Instructions
7696 Route 31 Lyons NY 14489 Voice: 315.946.1213 Fax: 315.946.4456 www.caswellplating.com CASWELL REPROCHROME® PLATING INSTRUCTIONS Caswell REPROCHROME® is a unique Cobalt/Tungsten plating solution that provides a bright, chrome-like plate onto ...
Woronko Plating Chamber
Plate long, thin parts without a huge tank with this ingenious design by Mr Henry Woronko.
Grip Strip Application Instructions
7696 Route 31 Lyons NY 14489 Voice: 315.946.1213 Fax: 315.946.4456 www.caswellplating.com GRIP-STRIPä NON-SKID SYSTEM APPLICATION INSTRUCTIONS Surface Preparation All surfaces should be clean, firm and dry. Areas painted with single pack, air drying ...
Black Oxide Instructions
7696 Route 31, Lyons NY 14489 Tel: (315) 946-1213 Fax: (315) 946-4456 www.caswellplating.com sales@caswellplating.com BLACK OXIDE KIT NEW COLD SYSTEM Professional Results In Minutes Simple Dip & Coat Method The commercial gun blue manufacturers ...
PTFE Electroless Nickel Instructions
7696 Route 31 Lyons NY 14489 Voice: 315.946.1213 Fax: 315.946.4456 www.caswellplating.com PTFE ELECTROLESS NICKEL PTFE or Teflon is an excellent coating for providing low friction values on parts, especially where two parts are sliding together. It ...
Changes To Electroless Kits
IMPORTANT CHANGES TO INSTRUCTIONS FOR ELECTROLESS NICKEL, KROME, COBALT AND BORON NITRIDE PLATING INSTRUCTIONS Instead of the ceramic heaters mentioned in the plating manual, we now supply glass lined tanks and a thermometer with these kits. The ...
Cerakote Instructions
TRAINING MANUAL TRAINING VIDEOS AVAILABLE AT YOUTUBE.COM/NICTRAINING WWW.CERAKOTEGUNCOATINGS.COM PLEASE READ Cerakote™ Firearm Coatings are designed for professionals and should be applied by NIC-trained applicators and coating professionals with ...
Electroless Copper Kit Instructions
Instructions For Plating With Our Electroless Copper system, including plating PCB Thru-Holes.
PROFFESIONAL GOLD PNP
CASWELL Inc PROFESSIONAL GOLD PLATING INSTRUCTIONS BRUSH PLATING 3 Amp Constant Current Rectifier ! Constant current/voltage power control - Only $95.00 This new system has the latest technology for small plating and anodizing operations. Several of ...
B9, B913, B929 Instructions and SDS
Metalx Specialty Products, Inc. B-9 Nickel Stripper, B-929, B-913, B-9 Plus, B-9 Nickel-Iron SDS Number: FP100 Revision Date: 5/15/2015 Page 1 of 7 1 PRODUCT AND COMPANY IDENTIFICATION Manufacturer Metalx Specialty Products, Inc 1333 Virginia St. ...
BLACK NICKEL INSTRUCTIONS
Black Nickel Plating Kit Instructions Black Nickel Plating results in a translucent to solid black metal coating over Nickel, Copper, Brass, Tin, Steel, Stainless Steel and Zinc. Plating over Zinc will give the darkest colors. Depth of color can be ...
STAINLESS STEEL BLACKENER
7696 Route 31 Lyons NY 14489 P: 315.946.1213 F: 315.946.4456 www.caswellplating.com sales@caswellplating.com SSB370 Instructions Room Temperature Blackening Solution for Stainless Steel Stainless Steel Blackener 370 is an acidic liquid concentrate ...
YELLOW CHROMATE
Chromate Processes Chromating is a process used primarily on zinc plating, zinc die casting (pot metal), and cadmium plating. ‘Golden Cad' is really a cadmium plate that has been ‘chromated’ with a yellow chromate. Zinc and cadmium are electroplates ...
SCIENCE KIT ZINC
CASWELL SCIENCE PLATING KITS ZINC PLATING Electroplating is a process that uses electricity to move metallic ions from a metal containing solution onto another surface. The process was invented in the early 1800’s and while the specific techniques ...
HARD COAT INSTRUCTIONS
HARDCOAT ANODIZING SYSTEM TYPE III Chemicals and Equipment To Setup A Hardcoat Type III Anodize Line Contains: • 3 x 6 Gallon Tanks (for Degreaser, Desmut & Anodize Baths) • 1 x 8.5 Gal Enamel Tank (for sealing) • Aluminum Degreaser Powder • ...